Knowledge Base › Installation

How do I install a Nimbio device?

Most installations take under an hour and wire in parallel to your existing gate operator — no trenching, no new power run, no operator replacement.

For: Installers Category: Hardware & Installation

“Nimbio Gate Installation” — shows the full process: install, mount, and activate/provision the hardware.

Registering an installer profile

Do this before you arrive on site — you need the app’s Install tab enabled first.

Call Nimbio support

Call 800-353-3422, ext. 2.

Provide your details

Give your full name and phone number.

Support enables your Installer tab

Once enabled, the “Installer” tab appears in your app.

What installation involves

Pre-installation checklist — watch the video above, download the Nimbio app, and confirm you have Installer Access (the “Install” tab visible in the app). Installer Access is turned on by Nimbio support on request — if you don’t see the Install tab, call 800-353-3422 before you arrive on site.

On-site wiring — the controller wires in parallel to your operator’s existing dry-contact input; nothing is removed. Bluetooth and Location Services must be enabled on your phone for the app-based setup step.

App-based device configuration — activate the SIM, enter the community and gate owner details, set the gate’s location and name, and program the device. Bluetooth is used only for this one-time setup, never during normal operation.

Testing and mounting — a Nimbio support team member calls to test the gate before you close the panel. Mount with antennas pointing straight up.

We recommend a professional installer. Nimbio recommends having a licensed professional gate or low-voltage technician install your device. Our support team can also work directly with property owners or their personnel if you prefer to install it yourselves.

Open the full technician installation guide → Download printable field reference (PDF) ↓

Hardware specifications

Power

Input voltage: 6.5V–24V AC or DC
Nominal draw: 40–70mA at 24VDC
Peak draw: 2.4 Watts
Solar and battery-backed gates supported

Cellular

Pre-installed multi-carrier SIM
Connects to AT&T, Verizon, or T-Mobile — whichever is strongest
Works internationally too — international customers should contact us to confirm regional network support
Cellular LTE only, zero Wi-Fi required
Firmware updates delivered automatically over-the-air

Relay

Type: Omron mechanical relay
Rated life: 50,000,000 operations
Contact rating: 1A at 125VAC or 60VDC
Relay On Time: 0.5s, 1.0s, 2.0s, 3.0s (default), 4.0s, 6.0s, 8.0s, or 10s — adjustable in Box Settings

Compatibility

Fits inside standard gate operators
NEMA weatherproof enclosures available for legacy Linear and Ghost Controls units
Dedicated wiring diagrams for virtually any brand, including LiftMaster, Linear, DoorKing (DKS), FAAC Technologies, and others
External LTE antennas supported for low-signal locations (metal walls, etc.)

Frequently asked questions

Do I need an electrician or gate contractor? +

We recommend having a licensed professional gate or low-voltage technician install your Nimbio device. If property owners or their personnel prefer to install it themselves, our support team can work with them directly, with live phone support available at 1-800-353-3422.

Does installation require trenching or new wiring runs? +

No. Because Nimbio runs on cellular, there’s no local network connection to run. The controller wires directly to your existing gate operator terminals.

What if I run into trouble during installation? +

Tap “Request Call” in the app’s Install tab and a support team member will call you back, or reach us directly at 1-800-353-3422.